857 Keith Lane, Owings, MD 20736 | 800.604.9653 | Monday-Friday 8am-5pm
The SP-5 Smart MIG has three MIG torches that can be setup for three different base metals. The shielding gas and weld program with the appropriate synergic curve automatically switch when pulling the trigger. The SP-5 is ideal for auto body shops welding stainless steel, aluminum and zinc coated steel. In synergic mode, the microprocessor controls optimal arc stability and weld quality. The SP-5 also comes equipped for TIG and MMA/stick welding. MIG and TIG welding can be done in continuous or pulse mode. Maximum power output of 200 A.
Simply pick up the appropriate torch for the base metal you want to weld and pull the trigger. The SP-5 will automatically switch the weld program and synergic curve — no need to change wire spools or shielding gas.
Preprogrammed synergic curves maintain optimal arc stability and weld quality.
The SP-5 Comes with everything needed to perform TIG Welding.
The SP-5 comes with everytihng needed to perform MMA/Stick Welding.
Single phase 208-240V 50-60Hz
5 torches — 3 MIG, 1 TIG, 1 stick
3 wire spools
2 gas cylinders
Single phase 208-240V 50-60Hz
2 torches — 2 MIG
2 wire spools
2 gas cylinders
Single phase 208-240V 50-60Hz
3 torches — 1 MIG, 1 TIG, 1 stick
1 wire spool
1 gas cylinder
| Input Voltage: | Single Phase 280-240V 50-60Hz |
| Amps / Volts, Min – Max: | MIG – 20A / 15V – 200A / 24V TIG – 5A / 10V – 200A / 18V MMA – 5A / 20.2V – 200A / 28V |
| Protection: | IP 22 |
| Insulation: | H |
| System Weight: | 200 lb. (90 kg) |
5 Torches — 3 MIG, 1 TIG, 1 stick
3 Wire Spools
Pulsed Welding
Inverter Technology
Preloaded Synergic Programs
