ProSpot Product Line
Pro Pull Complete Dent Repair System
Because every shop is different and has varied needs, our expert sales team stands ready to help you select the right lift for your shop. We serve customers inMaryland, Virginia, Metro D.C., West Virginia and Delaware. Monday-Friday from 8am to 5pm. Give us a call for more information at 800.604.9653.
Pro Pull Complete Dent Repair System
The Pro Pull Complete utilizes the all new PR-3 Auto to generate the precise, High Power/Low Weld time needed to prevent damage to the corrosion protection on the backside of the panel. The PR-3 Auto senses when a weld tip or pull key have made contact and welds automatically after a short delay. The Auto feature is quick and user friendly due to the fact that it does not weld instantly like other higher-priced systems on the market. The Pro Pull Complete has all the accessories that you will need to make the repair fast, large or small.
More Features
Single-Sided Welding
The PR-3 auto is capable of handling a variety of single-sided welding needs, including:
-
Washer
-
Nut & Bolt
-
Nail
-
Rivet
-
Stitch
Dent Repair / Stitch Welding
-
Lever Bar
-
Slide Hammer
-
Weld-on Shaft Dent Pulling Kit
Dent Repair / Stitch Welding
The Hybrid comes standard with several different types of weld arm extensions (508mm U-Arm, C-Arm, Wheelhouse Arm) and others are available at request, so that you can tackle any welding problem with as much ease and accuracy as possible. From left: PS-503 600mm U-Arm, PS-305 508mm U0Arm, PS-306 C-Arm Deep, PS-403 X-Adapter, PS-302 C-Arm, PS-52-5/8 Wheelhouse Arm.
Dent Repair / Stitch Welding
Ideal for rust repair and patching, stitch welding works by delivering an intermittent or pulsating current while rolling the tip on the sheet metal edge.
Auto-Weld Feature
Position the weld tip on the bottom of the dent, weld, then squeeze the handle to initialize the pulling action.
Pull Bar Dent Pulling
The PR-3 Auto senses when a weld tip or pull key have made contact and welds automatically after a short delay. The Auto feature is quick and user friendly due to the fact that it does not weld instantly like other higher-priced systems on the market. Electrodes that can be used with the Auto-Mode include:
-
Pull Key Electrode (PS-880)
-
4mm Stud Holder Electrode (PS-820)
-
6mm Stud Holder Electrode (PS-839)
-
Washer Adapter (PS-840)
-
Rivet Holder (PS-870)
-
Spot Hammer Assembly (CLP-70)
-
Weld-on Shaft Dent Pulling Kit (CLP-110)
-
Weld-on Shafts (SA-0153, SA-0152, SA-0151)
Auto Welding
By using weld keys, you are able to pull a larger area at one time. It is also good for pulling out creases. When the keys are welded in a crease and the metal rod is inserted through the group of keys, the low portion of the crease will be pulled first and the entire crease pulled evenly flat. Used with the Pro Pull Single Pull or Pull Bar.
Pull Bar Dent Pulling
By using weld keys, you are able to pull a larger area at one time. It is also good for pulling out creases. When the keys are welded in a crease and the metal rod is inserted through the group of keys, the low portion of the crease will be pulled first and the entire crease pulled evenly flat. Used with the Pro Pull Single Pull or Pull Bar.
